Tools & Equipment of Turner trade
| Description of Tools | As NCVT norms | Existing |
|---|---|---|
| Caliper out side spring joint 150 mm | 13Nos. | 13Nos. |
| Caliper inside spring joint 150 mm | 13Nos. | 13Nos. |
| Caliper odd-leg firm joint 150 mm | 13Nos. | 13Nos. |
| Steel Rule 150 mm | 13Nos. | 13Nos. |
| Scriber 150mm x 3 mm | 13Nos. | 13Nos. |
| Hammer ball peen 250 gm with handle | 13Nos. | 13Nos. |
| Centre punch 100 mm | 13Nos. | 13Nos. |
| Prick punch 100 mm | 13Nos. | 13Nos. |
| Divider spring joint 150 mm | 13Nos. | 13Nos. |
| Safety goggles clear glass (Good quality) | 13Nos. | 13Nos. |
| Shop out fit | ||
| Surface plate 60 x 60 cm | 1 no. | 1 no. |
| Work bench 240 x 120x 90cm high | 1 no. | 1 no. |
| Marking table (CI) 120 x 120 cm | 1 no | 1 no |
| Bench vice 125 mm jaw | 6 nos. | 6 nos. |
| Vee-Block 75 and 125 mm with clamp | 1 pair each | 1 pair each |
| Universal Surface gauge 250 mm arm | 2 nos. | 2 nos. |
| Hammer ball peen 750 gm with handle | ||
| Chisel cold flat 20 x 150 mm | ||
| Hammer copper/brass 500 gm with handle | ||
| Hacksaw fixed 200 mm (Pistol grip) | ||
| File flat 300 mm rough | ||
| File flat 250 mm 2nd cut | ||
| File flat 250 mm smooth | ||
| File half round 250 mm 2nd cut | ||
| File round 250 mm smooth | ||
| File half round 150 mm smooth | ||
| Knurling tool revolving head (Rough, med, fine) diamond and straight | ||
| Combination set 300 mm (Complete Set) | ||
| Screw Driver 200 & 300 blade heavy duty | ||
| Spanner double ended 6 mm to 21 mm | ||
| Spanner adjustable 200 mm | ||
| Pliers flat nose 150 mm side cutting | ||
| Caliper transfer inside 150 mm | ||
| Micrometer Outside 0 to 1” Reading 0.0001” | ||
| Micrometer Outside 0 to 25 mm Reading 0.01 mm | ||
| Micrometer Outside 25 to 50 mm Reading 0.01 mm | ||
| Micrometer Outside 50to 75 mm Reading 0.01 mm | ||
| Micrometer Inside up to 25 mm Reading 0.01 mm | ||
| Micrometer Inside up to 50 to 150 mm reading 0.01 mm | ||
| Depth Gauge Micrometer 0 to 150 mm Reading 0.01 mm | ||
| Vernier Caliper Outside, Inside and Depth 200 mm /8 inches with metric & inch scale | ||
| Dial Vernier Caliper with metric 200 mm reading 0.05 mm | ||
| Vernier Bevel Protractor 300 mm blade | ||
| Vernier Micrometer 0 – 25 mm o/s LC 0.001mm | ||
| Vernier Micrometer 25 – 50 mm outside reading 0.001mm | ||
| Vernier Micrometer 0 inch to 1 inch. Outside Reading 0.0001 inch | ||
| Feeler Gauge 100 mm blade metric set | ||
| Radius Gauge 1 to 7 mm & 7.5 to 15 mm | ||
| Centre Gauge com. 60°, 55° and 29° | ||
| Screw Pitch Gauge Whitworth & Metric each | ||
| Drill Angle Gauge | ||
| Dial Test Indicator 0.01 mm with magnetic base | ||
| Vernier Height Gauge with dial 300 mm L.C. 0.01 mm | ||
| Try Square 150 blade | ||
| Magnifying Glass 75 mm dia. | ||
| Plain Ring and Plug Gauge 12 to 50 mm by 1mm | ||
| Wheel Dresser Huntingon-type with star cutter | ||
| Wheel Dresser Diamond ( inserted-0.75 or 1 Carat ) | ||
| Screw Thread micrometer interchangeable | ||
| Morse Taper Plug & Ring Gauge no. 0 to 7 MT | ||
| Sin Bar with centers 200 mm | ||
| Slip Gauge metric set ( 87 pieces in a Box ) | ||
| Morse Taper Sleeves No. 0-1, 1-2, 2-3, 3-4, 4-5. | ||
| Drill Drift | ||
| Twist Drill straight shank 1 to 12 mm by 1 mm | ||
| Twist Drill taper shank 10-12 mm by 0.5 mm | ||
| Drill Chuck 12 mm cap with key | ||
| Tap & Die B.A. No. 0 to 10 in a box | ||
| Tap & Die metric set up to 25 mm | ||
| Tap & Die B.S.F. up to 1 inch | ||
| Tap & Die B.S.W. up to 1 inch | ||
| Reamer machine straight flute 6 to 25 mm | ||
| Reamer Adjustable 10 to 20 mm | ||
| Tool Holder RH & straight for mm square tool bit | ||
| Parting Tool Holder with H.S.S. blade | ||
| Tool Bits 12 X 150 mm sq. assorted shaped | ||
| Boring Tool holder for 6 mm sq. tool bit | ||
| Steel Rule 300 mm with Metric and Inch | ||
| Oil Can ½ pint ( pressure feed system ) | ||
| Dog Carrier 235, 50 and 75 mm | ||
| Angle Plate with slots 200 mm | ||
| Spirit Level 0.05 meter 200 m | ||
| Tool Maker’s button | ||
| Combination Drill A-2.5 and A-1 | ||
| Oil Stone 12 mm sq. x 100 long fine | ||
| Tap Wrench ( adjustable ) | ||
| Die Handle | ||
| Tool Bit assorted sizes on holder | ||
| Machine Vice 100 mm jaw ( For Drill Machine ) | ||
| Chalk Board on mobile stand | ||
| Spare Grinding Wheel Ajax type for carbide tool | ||
| Almirah-1980x 910 x 480 mm | ||
| St. Locker with drawer ( Pigeon holes ) | ||
| Desk | ||
| Stool | ||
| Angle Gauge for tool grinding | ||
| Hand Chaser M-12 & M-16 ( External ) | ||
| Hand Chaser M-12 & M-16 (Internal ) | ||
| Revolving Centrer ( to suit Lathe tailstock ) | ||
| Tool Cemented carbide assorted shaped (External) for steel turning –set of 12 nos. | ||
| Thread Plug Gauge M-20 & M-21 | ||
| Thread Ring Gauge M-20 & M-21 | ||
| Machine Chase M-12TO m-21 (Std. Series) to suit on | ||
| Coventry Die head | ||
| Gauge Drill Grinding | ||
| Magnetic Chuck 150 mm dia.( Circular type ) | ||
| Lathe Mandrels (Diff. Types) | ||
| Conventry Type Die Head ( Self opening ) | ||
| Collapsible Tap with attachment | ||
| Combination Drill | ||
| Fire Extinguisher and buckets | ||
| Bore dial gauge stems – 12 to 35 mm, 35 to 65 mm., dial gauge | ||
| indicator of 0.01 accuracy. |
| Description of Tools | As NCVT norms | Existing |
|---|---|---|
| Lathe S.S. & S.C. ( All geared head stock ) with minimum specification as: 150 mm center height, to admit 750 mm between centers. Machine to be motorized and supplied with coolant installation, 4-jaw Independent chuck 150 mm, 3-jaw self-centering chuck 150 mm, fixed steady, traveling steady, face plate, driving plate, 4-way tool post, quick change gear box for Metric or British threads, live and dead centers with taper attachments. | 5 nos. | 5 nos. |
| Lathe S.S & S.C.(all geared type) with minimum specification
as: 150 mm. Center height, 1000 mm between centers, gap bed machine to be motorized and supplied with coolant installation, 4-jaw independent chuck 250 mm , 3-jaw self-centering chuck 200 mm fixed steady, face plate, driving plate, 4-way tool post, quick change gear box for Metric/British threads, live and dead centers with taper attachments. |
1 no. | 1 no. |
| Lathe tool room S.S. & S.C. (all geared type) with minimum
specification as: 150 mm center height, 1000 mm between centers. Machine to be motorized and supplied with coolant installation, 4-jaw independent chuck 250 mm, 3-jaw self-centering chuck 150 mm fixed steady, traveling steady, face plate, driving plate, 1-way tool post, draw in type collets set up to 25 mm, 0.5 mm, relieving attachments. |
1 nos. | 1 nos. |
| Grinding machine pedestal type D.E. 150 mm dia. Wheel with
wheel guard and vision. |
1 no. | 1 no. |
| Drill machine pillar type-motorized up to 12 mm. Cap. | 1 no. | 1 no. |
| Power saw machine – hydraulic feed system – 400 mm.
Blade size. |
1 no. | 1 no. |
| CNC turn Centre with minimum specification as: Chuck size:135mm
Between centre distance: 250mm Travel in X: 100mm Travel in Z: 200mm No. of tool stations: 8 station turret Spindle power: 3.7kW (continuous rating) preferably with popular control system like Fanuc/Siemens along with motorized coolant system.
|
1 No. | 1 No. |
| a) Multimedia teach ware/courseware for CNC
technology and interactive CNC part programming software for turning & milling with virtual machine operation and simulation using popular operation control system such as Fanuc, Siemens, etc. (Web-based or licensed based) (10 trainess + 1 faculty) b) Desktop Computers compatable to run above simulation software with LAN facility
|
a) 11 users
b) 11 users
|
a) 11 users
b) 11 users
|
| Tool holders to suit the CNC machine for turning, threading,
grooving (external & internal), parting off operation, boring, under-cutting with 20 inserts of each operation. |
2 each
|
2 each
|
| LCD projector / large screen TV | 1 no. | 1 no. |
| Digimatic Electronic Vernier Caliper inch and mm
8”/200 mm. LCM 0.005”/0.001 mm
|
2 nos.
|
2 nos.
|
| Digimatic electronic outside Micrometer
(0 to 25 mm & 25 to 50 mm) LC 0.001 mm.
|
1 no. each
|
1 no. each
|
Search ForOur Courses
Fill The Below Form and Start Searching