Tools & Equipment of Fitter Trade

Description of Tools	As NCVT norms	Existing
Steel Rule 15 cm with metric graduation	17 Nos.	17 Nos.
Try Square 10 cm blade.	17 Nos.	17 Nos.
Caliper inside 15 cm spring.	17 Nos.	17 Nos.
Caliper 15 cm hermaphrodite	17 Nos.	17 Nos.
Caliper outside 15 cm spring	17 Nos.	17 Nos.
Divider 15 cm spring	17 Nos.	17 Nos.
Straight Scriber 15 cm.	17 Nos.	17 Nos.
Centre Punch 10 cm	17 Nos.	17 Nos.
Screw driver 15 cm	17 Nos.	17 Nos.
Chisel cold flat 10 cm	17 Nos.	17 Nos.
Hammer ball peen 0.45 kg. With handle	17 Nos.	17 Nos.
Hammer ball peen 0.22 kg. With handle.	17 Nos.	17 Nos.
File flat 25 cm. second cut	17 Nos.	17 Nos.
File flat 25 cm. smooth	17 Nos.	17 Nos.
File half round second cut 15 cm.	17 Nos.	17 Nos.
Hacksaw frame fixed 30 cm.	17 Nos.	17 Nos.
Safety goggles.	17 Nos.	17 Nos.
Dot slot punch 10 cm.	17 Nos.	17 Nos.
Shop out fit
Steel Rule 30 cm	4 nos.	4 nos.
Steel Rule 60 cm.	4 nos.	4 nos.
Straight edge 45 cm steel	2 nos.	2 nos.
Surface plate 45 x 45 cm CI / Granite.	2 nos.	2 nos.
Marking table 91 x 91 x 122 cm.	1 no.	1 no.
Universal scribing block 22 cm.	2 nos.	2 nos.
V-Block pair 7 cm and 15 cm with clamps	2 nos.	2 nos.
Square adjustable 15 cm blade.	2 nos.	2 nos.
Angle plate 10 x 20 cm.	2 nos.	2 nos.
Spirit Level 15 cm metal	1 no.	1 no.
Punch letter 3 mm set.	1 no.	1 no.
Punch number set 3 mm.	1 no.	1 no.
Punch hollow 6 mm to 19 set of 5	2 nos.	2 nos.
Punch round 3mm x 4 mm set of 2	2 nos.	2 nos.
Portable hand drill (Electric) 0 to 6 mm	2 nos.	2 nos.
Drill twist straight shank 1.5 to 12 mm by 0.5 mm	1 Set	1 Set
Drill twist straight shank 8 mm to 15 mm by ½ mm	1 Set	1 Set
Taps and dies complete set in box B.A	1 no.	1 no.
Taps and dies complete set in box with-worth.	1 no.	1 no.
Taps and dies complete set in box 3-18 mm set of 10	1 no.	1 no.
File warding 15 cm smooth	4 nos.	4 nos.
File knife edge 15 cm smooth	4 nos.	4 nos.
File cut saw 15 cm smooth	4 nos.	4 nos.
File feather edge 15 cm smooth	4 nos.	4 nos.
File triangular 15 cm smooth	2 nos.	2 nos.
File round 20 cm second cut	8 nos.	8 nos.
File square 15 cm second cut	4 nos.	4 nos.
File square 25 cm second cut	4 nos.	4 nos.
Feeler gauge 10 blades	1 set	1 set
File triangular 20 cm second cut.	8 nos.	8 nos.
File flat 30 cm second cut.	8 nos.	8 nos.
File flat 20 cm bastard	8 nos.	8 nos.
File flat 30 cm bastard.	8 nos.	8 nos.
File Swiss type needle set of 12.	2 sets	2 sets
File half round 25 cm second cut.	8 nos.	8 nos.
File half round 25 cm bastard.	4 nos.	4 nos.
File round 30 cm bastard.	4 nos.	4 nos.
File hand 15 cm second cut.	8 nos.	8 nos.
Card file.	8 nos.	8 nos.
Oil Stone 15 cm x 5 cm x 2.5 cm	4 nos.	4 nos.
Stone carborandum 15 cm x 5 cm x 5 cm x 4 cm.	2 nos.	2 nos.
Oil Can 0.25 liters.	2 nos.	2 nos.
Pliers combination 15 cm	2 nos.	2 nos.
Soldering Iron 350 gm.	2 nos.	2 nos.
Blow Lamp 0.50 liters.	2 nos.	2 nos.
Spanner D.E. 6 -26 mm set of 10 pcs.	8 nos.	8 nos.
Spanner adjustable 15 cm	2 nos.	2 nos.
Interchangeable ratchet socket set with a 12 mm driver, sized10-32 mm set of 18 socket & attachments.	1 set	1 set
Box spanner set 6-25 mm set of 8 with Tommy bar.	1 set	1 set
Glass magnifying 7 cm	2 nos.	2 nos.
Clamp toolmaker 5 cm and 7.5 cm set of 2.	2 nos.	2 nos.
Clamp “C” 5 cm	2 nos.	2 nos.
Clamp “C” 10 cm	2 nos.	2 nos.
Hand Reamer adjustable cover max 9 ,12,18mm – set of 3	1 set	1 set
Hand Reamer taper 4 -9mm set of 6 OR 4 -7 mm set of 4.	1 set	1 set
Reamer parallel 12 – 16mm set of 5.	1 no.	1 no.
Scraper flat 15 cm.	8 nos.	8 nos.
Scraper triangular 15 cm	8 nos.	8 nos.
Scraper half round 15cm	8 nos.	8 nos.
Chisel cold 9 mm cross cut 9 mm diamond.	8 each	8 each
Chisel cold 19 mm flat	8 nos.	8 nos.
Chisel cold 9 mm round noze.	8 nos.	8 nos.
Stud Extractor EZY – out	2 nos.	2 nos.
Combination Set 30 cm.	2 nos.	2 nos.
Micrometer 0 – 25 mm outside.	2 nos.	2 nos.
Micrometer 25 – 50 mm outside.	3 nos.	3 nos.
Micrometer 50 –75 mm outside.	2 nos.	2 nos.
Micrometer inside 25 – 50 mm with extension rods.	1 no.	1 no.
Vernier caliper 15 cm	1 no.	1 no.
Vernier height gauges 30 cm.	1 no.	1 no.
Vernier bevel protractor.	1 no.	1 no.
Screw pitch gauge.	1 no.	1 no.
Wire gauge, metric standard.	1 no.	1 no.
Drill twist Taper Shank 12 mm to 25 mm x 1.5.	1 no.	1 no.
Drill chuck 12 mm.	1 no.	1 no.
Pipe wrench 40 cm	1 no.	1 no.
Pipe vice 100mm	1 no.	1 no.
Adjustable pipe tap set BSP with die set cover pipe size 15, 20, 25,32,38,50 mm.	1 no.	1 no.
Wheel dresser (One for 4 units).	1 no.	1 no.
Machine vice 10 cm.	1 no.	1 no.
Machine vice 15 cm	1  no.	1  no.
Sleeve drill Morse 0 – 1, 1 – 2, 2 – 3.	1 Set	1 Set
Vice bench 12 cm jaws.	16 nos.	16 nos.
Vice leg 10 cm jaw.	2 nos.	2 nos.
Bench working 240 x 120 x 90 cm.	4 nos.	4 nos.
Almirah 180 x 90 x 45 cm.	2 nos.	2 nos.
Lockers with 6 drawers (standard size).	2 nos.	2 nos.
Metal rack 182 x 182 x 45 cm	1 no.	1 no.
Instructor Table	1 no.	1 no.
Instructor Chair	1 no.	1 no.
Black board with easel.	1 no.	1 no.
Fire extinguisher (For 4 Units)	2 nos.	2 nos.
Fire buckets.	2 nos.	2 nos.
Machine vice 100mm.	2 nos.	2 nos.
Wing compass 25.4 cm or 30 cm.	2 nos.	2 nos.
Hand hammer 1 kg. with handle.	2 nos.	2 nos.
Torque wrench (14 to 68 Nm)	1 no.	1 no.
Hammer smith 2 kg. With handle.	2 nos.	2 nos.
Tongs roving 350mm.	2 nos.	2 nos.
Tongs fiat 350mm.	2 nos.	2 nos.
Smith’s square 45 cm x 30 cm.	1 no.	1 no.
Cold set rodded 25X200mm.	2 nos.	2 nos.
Hot set rodded 25X200mm.	1 no.	1 no.
Swages top & bottom 12 mm /19	1 Each	1 Each
Swage block 35 x 35 x 12 cm.	1 no.	1 no.
Flatters (rodded) 55 mm square.	2 nos.	2 nos.
Fuller top & bottom 6 mm 9 mm (Pair).	2 nos.	2 nos.
Anvil 50 kg.	2 nos.	2 nos.
Anvil stand	2 nos.	2 nos.
Shovel.	2 nos.	2 nos.
Trammel 30cm.	1 no.	1 no.
Rake.	2 nos.	2 nos.
Quenching tank (To be made in the Institute).	1 no.	1 no.
Pocker.	2 nos.	2 nos.
Hardle.	2 nos.	2 nos.
Leather apron.	2 nos.	2 nos.
Prick punch	2 nos.	2 nos.
Mallet.	2 nos.	2 nos.
Snips straight 25 cm.	2 nos.	2 nos.
Setting hammers with handle.	2 nos.	2 nos.
Planishing hammer.	2 nos.	2 nos.
Snip bent 25 cm.	2 nos.	2 nos.
Stake hatchet.	2 nos.	2 nos.
Stake grooving.	2 nos.	2 nos.
Gauge imperial sheet.	1 no.	1 no.
Slip Gauge as Johnson metric set.	1 Set	1 Set
Tools for 4th sem.
Carbide Wear Block 1 mm – 2 mm.	2 each	2 each
Gauge snap Go and Not Go 25 to 50 mm by 5mm. Set of 6 pcs.	1 Set	1 Set
Gauge plug single 3 ended 5 to 55 by 5 mm. Set of 11 pcs.	1 Set	1 Set
Gauge telescopic upto 150 mm.	1 no.	1 no.
Dial test indicator .01 mm on stand	1 no.	1 no.
Sine bar 125 mm.	1 no.	1 no.
Sine bar 250 mm.	1 no.	1 no.
Lathe tools H.S.S. tipped set.	2 nos.	2 nos.
Lathe tools bit 6 mm x 75 mm.	4 nos.	4 nos.
Lathe tools bit 8 mm x 75 mm.	4 nos.	4 nos.
Lathe tools bit 10 mm x 85mm.	4 nos.	4 nos.
Arm strong type tool bit holder R.H.	2 nos.	2 nos.
Arm strong type tool bit holder L.H.	2 nos.	2 nos.
Arm strong type tool bit holder straight.	2 nos.	2 nos.
Stilson wrenches 25 cm	2 nos.	2 nos.
Pipe cutter 6 mm to 50 mm wheel type.	1 no.	1 no.
Pipe bender spool type up to 25 mm. with stand manually	1 no.	1 no.
operated.
Adjustable pipe chain tonge to take pipes up to 300 mm.	1 no.	1 no.
Adjustable spanner 38 cm long.	1 no.	1 no.
Dial vernier caliper 0 – 200 mm LCO 0.05 mm. (Universal type).	1 no.	1 no.
Screw thread micrometer with interchangeable 0-25mm. Pitch	1 no.	1 no.
anvils for checking metric threads 60.
Depth micrometer 0-25 mm. 0.01 mm.	1 no.	1 no.
Vernier caliper 0-150 mm. L.C. 0.02 mm.	1 no.	1 no.
Digital Micrometer 0 – 25 mm outside. L.C. 0.001 mm.	1 no.	1 no.
Comparators stand with dial indicator LC 0.01mm.	1 no.	1 no.
Engineer‟s try square (knife-edge) 150 mm blade.	1 no.	1 no.
Surface roughness comparison plates N1-N12 grade	1 Set	1 Set
Digital Vernier caliper 0-150 mm. L.C. 0.001 mm.(Optional)	1no.	1no.