Tools & Equipment of Electrician trade

 

Description of Tools As NCVT norms Exist(s)
Steel Tape, 15 m length 17 Nos. 17 Nos.
Plier Insulated, 150 mm 17 Nos. 17 Nos.
Plier Side Cutting, 150 mm 17 Nos. 17 Nos.
Screw Driver, 100 mm 17 Nos. 17 Nos.
Screw Driver, 150 mm 17 Nos. 17 Nos.
Electrician Connector, screw driver insulated handle thin stem,100 mm 17 Nos. 17 Nos.
Heavy Duty Screw Driver , 200 mm 17 Nos. 17 Nos.
Electrician Screw Driver thin stem insulated handle, 250 mm 17 Nos. 17 Nos.
Punch Centre , 150 mm X 9 mm 17 Nos. 17 Nos.
Knife Double Bladed Electrician 17 Nos. 17 Nos.
Neon Tester 17 Nos. 17 Nos.
Steel Rule 300 mm 17 Nos. 17 Nos.
Hammer, cross peen with handle 17 Nos. 17 Nos.
Hammer, ball peen With handle 17 Nos. 17 Nos.
Gimlet 6 mm. 17 Nos. 17 Nos.
Bradawl 17 Nos. 17 Nos.
Scriber (Knurled centre position ) 17 Nos. 17 Nos.
Pincer 150 mm 17 Nos. 17 Nos.
C- Clamp 200 mm, 150 mm and 100 mm 2 Nos each 2 Nos each
Spanner Adjustable 150 mm,300mm 2 Nos each 2 Nos each
Blow lamp 0.5 ltr 1 1
Melting Pot 1 1
Ladel 1No 1No
Chisel Cold firmer 25 mm X 200 mm 2 2
Chisel 25 mm and 6 mm 2 Nos each 2 Nos each
Hand Drill Machine 1 1
Portable Electric Drill Machine 6 mm capacity 1 1
Pillar Electric Drill Machine 12 mm capacity 1 1
Allen Key 1 set 1 set
Oil Can 0.12 ltr 1 1
Grease Gun 1 No 1 No
Out Side Micrometer 2 2
Motorised Bench Grinder 1 1
Rawl plug tool and bit 2 set 2 set
Pully Puller 2 2
Bearing Puller 2 2
Pipe vice 4 4
Thermometer 0 to 100 deg Centigrade 1 No. 1 No.
Scissors blade 150 mm 4 Nos. 4 Nos.
Crimping Tool 2 sets 2 sets
     
Wire stripper 20 cm 2 Nos. 2 Nos.
Chisel Cold flat 12 mm 2 Nos. 2 Nos.
Mallet hard wood 0.50 kg 4 Nos. 4 Nos.
Hammer Extractor type 0.40 kg 4 Nos. 4 Nos.
Hacksaw frame 200 mm 300 mm adjustable 2 Nos.each 2 Nos.each
Try Square 150 mm blade 4 Nos. 4 Nos.
Outside and Inside Divider Calliper 2 Nos.each 2 Nos.each
Pliers flat nose 150 mm 4 Nos. 4 Nos.
Pliers round nose 100 mm 4 Nos. 4 Nos.
Tweezers 100 mm 4 Nos. 4 Nos.
Snip Straight and Bent 150 mm 2 Nos.each 2 Nos.each
D.E. metric Spanner 2 Nos. 2 Nos.
Drill hand brace 4 Nos. 4 Nos.
Drill S.S. Twist block 2 mm, 5 mm 6 mm set of 3 4 Set 4 Set
Plane, smoothing cutters 50 mm 2 Nos.each 2 Nos.each
Gauge, wire imperial 2 Nos. 2 Nos.
File flat 200 mm 2nd cut 8 Nos. 8 Nos.
File half round 200 mm 2nd cut 4 Nos. 4 Nos.
File round 200 mm 2nd cut 4 Nos. 4 Nos.
File flat 150 mm rough 4 Nos. 4 Nos.
File flat 250 mm bastard 4 Nos. 4 Nos.
File flat 250 mm smooth 4 Nos. 4 Nos.
File Rasp, half round 200 mm bastard 4 Nos. 4 Nos.
Soldering Iron 25 watt, 65 watt, 125 watt 2 Nos.each 2 Nos.each
Copper bit soldering iron 0.25 kg. 2 Nos. 2 Nos.
Desoldering Gun 4 Nos. 4 Nos.
Hand Vice 50 mm jaw 4 Nos. 4 Nos.
Table Vice 100 mm jaw 8 Nos. 8 Nos.
Pipe Cutter to cut pipes upto 5 cm. dia 4 Nos. 4 Nos.
Pipe Cutter to cut pipes above 5 cm dia 2 Nos. 2 Nos.
Stock and Die set for 20 mm to 50 mm G.I. pipe 1 set 1 set
Stock and Dies conduit 1 No. 1 No.
Ohm Meter; Series Type & Shunt Type each each
Multi Meter (analog) 0 to 1000 M Ohms,2.5 to 500 V 2 Nos. 2 Nos.
Digital Multi Meter 6 Nos. 6 Nos.
A.C. Voltmeter M.I. 0 –500V A.C 1 No. 1 No.
Milli Voltmeter centre zero 100 – 0 – 100 m volt 1 No. 1 No.
D.C. Milli ammeter 0 -500m A 1 No. 1 No.
Ammeter MC 0-5 A, 0- 25 A 1 No. each 1 No. each
A.C. Ammeter M.I. 0-5A, 0-25 A 1 No. each 1 No. each
Kilo Wattmeter 0-1-3 kw 1 No. 1 No.
A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp 1 No. each 1 No. each
Power Factor Meter 1 No. 1 No.
Frequency Meter 1 No. 1 No.
Flux meter 1 No. 1 No.
Wheat Stone Bridge with galvanometer and battery 1 No. 1 No.
Laboratory Type Induction Coil 1 No. 1 No.
DC Power Supply 0-30V, 2 amp 1 No. 1 No.
Rheostat

0 -1 Ohm, 5 Amp

0 -10 Ohm, 5 Amp

0- 25 Ohm, 1 Amp

0- 300 Ohm, 1 Amp

 1 No. each 1 No. each
1 Phase Variable Auto Transformer 1 No. 1 No.
Battery Charger 1 No. 1 No.
Hydrometer 1 No. 1 No.
Miniature Breaker 16 amp ( Raw Material) 1 No. 1 No.
Working Bench 2.5 m x 1.20 m x 0.75 m 4 Nos. 4 Nos.
Fire Extinguisher CO2, 2 KG 2 Nos. 2 Nos.
Fire Buckets 2 Nos. 2 Nos.
Tachometer 1 No. 1 No.
Current Transformer

415 Volt,50 Hz, CT Ratio 150 / 5 Amp, 5VA

 1 No. 1 No.
Potential Transformer

415 Volt,50Hz, PT Ratio 11KV/ 110V, 10VA

 1 No. 1 No.
Growler 1 No. 1 No.
Tong Tester / Clamp Meter 0 – 100 amp. AC 1 No. 1 No.
Megger 500 volts 1 No. 1 No.
Contactor & auxiliary contacts 3 phase, 440volt, 16amp (Raw Material) 1 No. each 1 No. each
Contactor & auxiliary contacts 3 phase, 440 volt, 32 amp. (Raw Material) 1 No. each 1 No. each
Limit Switch (Raw Material) 1 No. 1 No.
Rotary Switch 16 A (Raw Material) 1 No. 1 No.
Load Bank 5 KW( Lamp / heater Type) 1 No. 1 No.
Brake Test arrangement with two spring balance 0 to 25 kgrating

 

 1 No.

 

 

 1 No.

 

 
Knife Switch DPDT fitted with fuse terminals 16 amp(Raw Material) 4 Nos. 4 Nos.
Knife Switch TPDT fitted with fuse terminals 16 amp(Raw Material) 4 Nos. 4 Nos.
Voltage StabiliserInput: 150 – 230 volt ACOutput: 220 volt AC 1 No. 1 No.
3- point D.C. Starter 1 No. 1 No.
4- point D.C. Starter 1 No. 1 No.
Electrical Machine Trainer –

Suitable for demonstrating the construction and functioning of

different types of DC machines and AC machines (single phase and three phase). Should be fitted with friction brake

arrangement, dynamo meter, instrument panel and power

supply unit

 

 

 1 for 8

(4+4)

Units

 1 for 8

(4+4)

Units
Motor-Generator (AC to DC) consisting of :

Squirrel Cage Induction Motor with star delta starter and

directly coupled to DC shunt generator and switch board

mounted with regulator, air breaker, ammeter, voltmeter, knife

blade switches and fuses, set complete with case iron and plate,

fixing bolts, foundation bolts and flexible coupling.

Induction Motor rating: 7 HP, 400V, 50 cycles, 3 phase

DC Shunt Generator rating: 5 KW, 440V

 1 No. 1 No.
Used DC Generators-series, shunt and compound type for overhauling practice 1 No. each 1 No. each
D.C. Shunt Generator with control panel,2.5 KW, 220V 1 No. 1 No.
D.C. Compound Generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, 2.5 KW, 220 V 1 No. 1 No.
Diesel Generator Set with change over switch, over current

breaker and water-cooled with armature, star-delta

connections AC 3 phase, 5 KVA, 240 volt

 1 No. 1 No.
DC Series Motor coupled with mechanical load 0.5 to 2 KW, 220

Volts

 1 No. 1 No.
DC Shunt Motor 2 to 2.5 KW, 220 volts 1 No. 1 No.
DC compound Motor with starter and switch 2 to 2.5 KW ,220 volts 1 No. 1 No.
Single phase Transformer, core type, air cooled1 KVA , 240/415 V, 50 Hz 1 No. 1 No.
Three phase transformer, shell type oil cooled with all mounting 3 KVA , 415/240 V, 50 Hz , (Delta/Star) 1 No. 1 No.
Oscilloscope Dual Trace, 30 MHZ 1 No. 1 No.
Function Generator 1 No. 1 No.
Discrete Component Trainer 1 No. 1 No.
Linear I.C. Trainer 1 No. 1 No.
Digital I.C. Trainer 1 No. 1 No.
Oil Testing Kit 1 No. 1 No.
Hygrometer 1 set 1 set
a. Cut out

Relays

b. Reverse current

c. Over current

d. Under voltage

 1 No. each 1 No. each
Starters for 2 to 5 H.P. A.C Motors

a. Resistance type starter

b. Direct on line Starter

c. Star Delta Starter- manual, semi-automatic and automatic

d. Auto Transformer type

 1 No. each 1 No. each
Motor Generator(DC to AC) set consisting of – Shunt Motor with

starting compensator and switch directly coupled to AC

generator with exciter and switch board mounted with

regulator, breaker, ammeter, voltmeter frequency meter, knife

blade switch and fuses etc. Set complete with cast iron bed

plate, fixing bolts, foundation bolts and flexible coupling.

Shunt Motor rating : 5 HP, 440V

AC Generator rating : 3-Phase, 4 wire, 3.5 KVA, 400/230 Volts,

0.8 pf, 50cycles

 1 No. 1 No.
AC Squirrel Cage Motor with star delta starter and triple pole

iron clad switch fuse. 2 to 3 HP, 3-phase ,400 volts, 50 cycles

 1 No. 1 No.
AC phase-wound slip ring Motor with starter and switch 5 HP, 1 No. 1 No.
400 volts, 3-phase, 50 cycles

A.C. Series type Motor with mechanical load ¼ HP, 230V, 50 Hz

 1 No. 1 No.
Single Phase Capacitor Motor with starter switch 1 HP 230 volt 1 No. 1 No.
50 cycles

Universal Motor with starter/switch 230 volt, 50 cycles ¼ HP

 1 No. 1 No.
Stepper Motor with Digital Controller 1 No. 1 No.
Shaded Pole Motor 1 No. 1 No.
Bath Impregnating 1 No. 1 No.
Oven Stove 1 No. 1 No.
Synchronous motor 3 Phase, 3 HP, 415V, 50Hz, 4 Pole, with

accessories.

 1 no. 1 no.
Lux meter 1 no. 1 no.
Inverter- 1 KVA with 12 V Battery

Input- 12 volt DC,

Output- 220 volt AC

 1 No. 1 No.
Domestic Appliances –

a. Electric Hot Plate 1500 watt

b. Electric Kettle, 1500 watts

c. Electric Iron 1500 watts

d. Immersion Heater 1500 watt

e. A.C. Fan

f. Geyser (Storage type) 15 ltr minimum

g. Mixture & Grinder

 1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

 1 No.

1 No.

1 No.

1 No.

1 No.

1 No.

1 No.
Thyristor /IGBT controlled D.C. motor drive with tacho-

generator feedback arrangement 1 HP

 1 No. 1 No.
Thyristor/IGBT controlled A.C. motor drive with VVVF control

3 Phase, 2 HP

 1 No. 1 No.
Pentium IV Computer or latest (Server- Linux), 2.8 GHz &

above, 1 GB RAM, 80 GB HDD, DVD Combo Drive, 15/17”

Monitor, optical scroll mouse, multimedia key board, 32 bit

LAN card with UPP port, necessary Drivers, etc.

 2 Nos. 2 Nos.
Ink jet/ laser printer 1 No. 1 No.
Washing Machine 1 No. 1 No.
Motor Pump set 1 HP, 1 Phase, 240 V 1 No. 1 No.
Pin Type, shackle type & suspension type insulators (Raw

Material)

 2 Nos.

each

 2 Nos.

each
Pentium IV Computer or latest (Server- Linux), 2.8 GHz & above,

1 GB RAM, 80 GB HDD, DVD Combo Drive, 15/17” Monitor,

optical scroll mouse, multimedia key board, 32 bit LAN card

with UPP port, necessary Drivers, etc.

 2 Nos. 2 Nos.
Instructor’s table 1 No. 1 No.
Instructor’s chair 2 Nos. 2 Nos.
Metal Rack 100cm x 150cm x 45cm 4 Nos. 4 Nos.
Lockers with 16 drawers standard size 2 Nos. 2 Nos.
Almirah 2.5 m x 1.20 m x 0.5 m 1 No. 1 No.
Black board/white board 1 No. 1 No.
Privacy Policy | Terms of Use
© 2012-2023 All rights reserved by Govt. Technical Training Institute | Powered By INFOCREATIVES