Tools & Equipment of Machinist
Description of tool As NCVT Norm Existing
Steel rule 30 cm graduated both in English & Metric units 16 nos. 16 nos.
Outside spring caliper 150 mm 8 nos. 8 nos.
Inside spring caliper 150 mm 8 nos. 8 nos.
Hermaphrodite caliper 150 mm 8 nos. 8 nos.
Divider spring 150 mm 8 nos. 8 nos.
Centre Punch 100 mm 8 nos. 8 nos.
Hammer B.P. 0.5 kg. 16 nos. 16 nos.
Cold chisel flat 25 x 200 mm 16 nos. 16 nos.
File flat bastard 300 mm 16 nos. 16 nos.
File flat 2nd cut 250 mm 16 nos. 16 nos.
File flat smooth 200 mm 16 nos. 16 nos.
Engineers screw driver 16 nos. 16 nos.
Combination Plier 150 mm 16 nos. 16 nos.
Safety glasses 16 nos. 16 nos.
Surface plate 400 mm x 400mm grade 1 no. 1 no.
Table for surface plate 900 x 900 x 1200 mm 1 no. 1 no.
Marking off table 1200 x 1200 x 900 mm high 1 no. 1 no.
Scribing block universal 300 mm 2 nos. 2 nos.
V- Block 100/7 – 80 – A 2 nos. 2 nos.
Try square 300 mm 2 nos. 2 nos.
Outside spring caliper 200 mm 2 nos. 2 nos.
Divider spring 200 mm 2 nos. 2 nos.
Inside spring caliper 200 mm 2 no. 2 no.
Straight edge steel 1 meter 1 no. 1 no.
Straight edge steel 500 mm 1 no. 1 no.
Steel tape 2 meter in case 1 no 1 no
Steel rule 60 cm graduated both in English & Metric units 2 nos. 2 nos.
Sprit level 2V 250, 05 meter 1no 1no
Hammer B.P. 800 gms. With handle 4 nos. 4 nos.
Screw driver, heavy duty 300 mm with handle 4 nos. 4 nos.
Hammer lead 1 kg. 2 nos. 2 nos.
Spindle blade screw driver 100 mm 4 nos. 4 nos.
Allen Hexagonal keys 2.5 to 12 2 sets 2 sets
Spanner D.E. series 2 (set of 7 pieces) 6 sets 6 sets
Adjustable spanner 300 mm 2 nos. 2 nos.
Reduction sleeve Morse 1-1, 3-1, 4-1, 4-2, 5-1, 5-2, 6-1, 2 nos. each 2 nos. each
Angle plate size 200 x 100 x 200 mm 2 nos. 2 nos.
Angle plate adjustable 250 x 150 x 175 mm 2 nos. 2 nos.
Solid parallels in pairs (different sizes) in Metric 12 pairs 12 pairs
Oil Can pressure feed 500 mg. 6nos 6nos
Oil stone 150 x 50 x 25 mm 2nos 2nos
Number drills H.S.S. (parallel shank) 1set 1set
Twist drills 3 mm to 13 mm in step of 0.5 mm (parallel shank) 2set 2set
Drill Chuck 0.20 with taper shank 1no 1no
Centre drill A 1 to 5 2set 2set
Grinding wheel dresser (diamond) 1no 1no
Grinding wheel dresser Huntington type 2 nos. 2 nos.
Clamps C 100 mm 2nos 2nos
Clamps C 200 mm 2nos 2nos
Tap and Die set in box metric pitch (6 mm to 12 mm) 1set 1set
Drill H.S.S. taper shank (6 mm to 12 mm in step of 0.5 mm) 2set 2set
File flat 2nd cut 250 mm 4nos 4nos
File flat smooth 200 mm 4nos 4nos
File Half round 2nd cut 250 mm 4nos 4nos
File triangular smooth 200 mm 4nos 4nos
Needle file set 1no. 1no.
File square 2nd cut 250 mm 4nos 4nos
Reamer 6 mm to 25 mm by 1 mm 1set 1set
Reamer adjustable 10 mm to 15 mm by 75 mm 1set 1set
Tool bits H.S.S. 6 mm square 1 Dozen 1 Dozen
Tool bits H.S.S. 10 mm square 1 Dozen 1 Dozen
Tool bits holder (Armstrong) L.H 4nos 4nos
Tool bits holder (Armstrong) R.H. 4nos 4nos
Assorted tools  and bit holders for lathe, shaper, slotter & planner in different shapes and sizes As required As required
Hacksaw frame adjustable 250-300 mm with blades 2nos 2nos
Table chuck 75 mm jaw swivel base 1no 1no
Machine vice 200 mm swivel base 4nos 4nos
Machine vice 160 mm swivel base 2nos 2nos
Hand vice 50 mm jaw 2nos 2nos
Radius turning attachment 1no 1no
Angle turning attachment 1no 1no
Compound angle vice (standard sine) 1no 1no
Universal vice 150 mm 1no 1no
Universal table angle plate 1no 1no
Shaper tool holder turret type 2nos 2nos
Base chuck for slotter 1no 1no
shaper indexing center 1no 1no
Knurling tools (set of 3) straight and diamond 1each 1each
Plier cutting 200 mm 2nos 2nos
Carbide tipped tools of different sizes and shapes (throw away tips) 2sets 2sets
Hand hammer 1 kg. With handle 2nos 2nos
Cylindrical cutter 63 x 90 bore dia 3nos 3nos
Cylindrical cutter 80 x 90 bore dia. 3 nos 3 nos
Side and face cutter dia 80 x 8 2 nos 2 nos
Side and face cutter dia 160 x 10 3 nos 3 nos
Side and face cutter dia 100 x 12 2 nos 2 nos
Side and face cutter dia 160 x 16 2 nos 2 nos
Side and face cutter dia 200 x 20 3 nos 3 nos
Side and face cutter dia 100 x 10 2 nos 2 nos
Equal angle cutter 450/100 2 nos 2 nos
Equal angle cutter 600/100 2 nos 2 nos
Equal angle cutter 900/100 2 nos 2 nos
Double angle unequal cutter 50 x 12 x 550 2 nos 2 nos
Double angle unequal cutter 50 x 12 x 600 2 nos 2 nos
Double angle unequal cutter 50 x 12 x 700 2 nos 2 nos
Double angle unequal cutter 50 x 12 x 750 1 no 1 no
Single angle cutter 63 x 18 x 450 RH 1 no 1 no
Single angle cutter 63 x 18 x 450 LH 1 no 1 no
Single angle cutter 63 x 18 x 600 RH 1 no 1 no
Single angle cutter 63 x 18 x 600 LH 1 no 1 no
Slitting Saw cutter Ø 75 x 3 X Ø 27 mm 2 nos. 2 nos.
Slitting Saw cutter  Ø 100 x 6 X Ø 27 mm 2 nos. 2 nos.
Shell End Mill Ø 50 x 36 x Ø 22 (preferably inserted tip type) 2 nos. 2 nos.
Shell End Mill Ø 75 mm x 50 x Ø 22 (preferably inserted tip type) 2 nos. 2 nos.
Parallel shank end mills  Ø6, Ø10 and Ø 16 are (double fluted), Ø 20 mm 4 nos. each 4 nos. each
& Ø 25mm (four  fluted)    
‘T’ slot cutter with parallel shank- Ø 17.5 x 8 mm width x dia. of shank8 mm 2 nos. 2 nos.
Concave Milling cutter Ø 63 x 6 radius x Ø 27 mm 1 nos. 1 nos.
Convex Milling cutter Ø 63 x 6 radius  x Ø 27 mm 1 nos. 1 nos.
Disc type form milling cutter (involutes form -2 module, 20° pressure angle) 1 set 1 set
Micrometer outside 0-25 mm 4 nos 4 nos
Micrometer outside 25-50 mm 2 no 2 no
Micrometer outside 50-75 mm 1 no 1 no
Micrometer depth gauge 0-200 mm 1no 1no
Digital micrometer 0-25 mm 1 no 1 no
Direct reading vernier caliper 0- 300 (direct reading with dial) 1no 1no
Digital vernier caliper 0- 300 mm 1 no 1 no
Vernier height gauge 250 mm 1 no 1 no
Vernier gear tooth caliper 1no 1no
Combination set with 300 mm rule 2 sets 2 sets
Vernier bevel protractor with 150 m blade 1 no 1 no
Bevel gauge 200 mm 1 no 1 no
Telescopic gauge 13 mm to 300 mm 1set 1set
Sine Bar 200 mm 1 no 1 no
Dial test indicator with magnetic gauge type 1 grade A with magnetic base 1 no 1 no
Center gauge 600 1 no 1 no
Slip gauge set (normal set) metric (for the  whole institute) 1 set 1 set
Screw pitch for metric pitches (25-6 mm) 2 sets 2 sets
Radius gauge metric set (1-6 mm) 1 set 1 set
Limit plug gauges 5 mm to 25 mm by 2.5 mm 1 set 1 set
Ring gauges 5 mm to 25 m by 2.5 mm (GO & NO GO) 1 set 1 set
Taper gauge M.T. No. 1, 2, 3, 4 & 5 1 set 1 set
Feeler gauge 1 no 1 no
Planer gauge standard size 1 no 1 no
Magnifying glass 75 mm 2nos 2nos
Steel lockers for 12 trainees 1no 1no
Steel chair for Instructor 1 no 1 no
Steel table for Instructor 1 no 1 no
Work bench for Fitters with 2 vices of 100 mm jaw 1no 1no
Steel cup board 180 x 90 x 45 mm 1 no 1 no
Steel cup board 120 x 60 x 45 cm 1no 1no
Black board with easel 1 no 1 no
First Aid Box 1 no 1 no
Shaping machine 450 mm stroke (motorized) with all attachments 2 2
Shaping machine 315 mm stroke (hydraulic) with all attachments 1 1
Double column planer 1500 x 1000 x 1000 (motorized) with all attachments 1 1
Slotter 180 mm stroke (motorized) with all attachments 1 1
SS and SC centre lathe (all geared) with specification as:

Centre height 150 mm and centre distance 1000 mm along with 4 jaw

chuck, Taper turning attachment, steadies, auto feed system, safety

guard, motorized coolant system, with lighting arrangement  and set of

lathe tools.

 3 3
Tool and cutter grinder 250 mm to admit 450 m between center-fully

motorized work head supplied with tool rest of different types table

clamps and other attachments.

 1 1
Pillar Drill machine 20 mm capacity with drill chuck & key. 1 1
Radial drill 1200 mm area motorized with tapping attachment 1 1
Silicon carbide grinder for carbide tipped tools 1 1
Double ended Pedestal Grinder with 178 mm wheels(one fine and one

rough wheel)

 1 1
Universal Milling machine with minimum specification as:

Table Length x width 1200 x 300 mm having motorized up & down

movement along with auto feed arrangement and with following

attachments such as:

a.Vertical head

b.Slotting attachment

c.Rack cutting attachment

d.Rotary table

e.Dividing head

f.   Adaptors, arbors and collects etc. for holding straight shank drills and cutters from 3 mm to 25 mm.

 

 2 nos. 2 nos.
Horizontal Milling Machine with minimum specification as:

Table Length x width 1200 x 300 mm having motorized up & down

movement along with auto feed arrangement and 150mm 1Universal vice.

 1 1
Vertical Milling Machine with minimum specification as:

Table Length x width 1200 x 300 mm having motorized up & down

movement along with auto feed arrangement along with 150mm universal vice.

 1 1
Surface Grinding Machine with minimum specification as:

Grinding machine plain surface, wheel dia. 175 mm (or near) with

reciprocating table having longitudinal table traverse 200 mm (or near)

fully automatic and fitted with adjustable traverse stops, machine to be

fully motorized and fitted with ace guards and pumps, tank and pump

fittings and also to be supplied with magnetic chuck 250 x 112 mm.

Diamond tool holder, set of spanners, grease gun, oil-can and spare

grinding wheel for general purpose grinding.

 1 1
Cylindrical grinder

Max. grinding length300 mm

Height of centre130 mm

Max. distance between centers340 mm

 1 1
CNC Milling Machine/Vertical Machining Centre with minimum

specification as:

Table size:500x250mm

Travel X-axis x Y-axis x Z-axis: 300 x 250 x 250mm

Auto Tool Changer: 8 nos.

Spindle power: 3.7kW (continuous rating) with popular control system

like Fanuc/Siemens or equivalent along with motorized coolant system.

 1 1
a)  Multimedia based simulator

interactive CNC part programming software for turning &

milling with virtual machine operation and simulation using

popular operation control system such as Fanuc, Siemens, etc.

(Web-based or licensed based) (10 trainess + 1 faculty)

b)  Desktop with MS-Windows-7 or latest to run above software,networked on LAN.

 11

 

 

11

 11

 

 

11
CNC milling tools assorted such as adapters to suit above machine to

accommodate face cutter, shell end mill cutter, taper shank and

parallel shank drills/cutters.

 2 sets along with

cutters & inserts

 2 sets along with

cutters & inserts
CNC hole machining tools assorted such as adapters to suit above machine to accommodate different boring bars. 2 sets along with cutters & inserts. 2 sets along with cutters & inserts.
LCD projector / large screen TV 1Nos. 1Nos.
Privacy Policy | Terms of Use
© 2012-2024 All rights reserved by Govt. Technical Training Institute | Powered By INFOCREATIVES