Tools & Equipment of MMTM
Description of Tools As NCVT norms Existing
Steel Rule 15 cm both side Graduated in Metric & English. 21nos. 21nos.
Center punch 100 mm 21nos. 21nos.
File flat 2nd cut 250 mm 21nos. 21nos.
File flat bastard 350 mm 21nos. 21nos.
File flat smooth 200 mm 21nos. 21nos.
     
Hermaphrodite Caliper 150 mm 4 nos. 4 nos.
Try Square 150 mm 4 nos. 4 nos.
Hack Saw frame adjustable 250-300 mm with blades. 4 nos. 4 nos.
Hammer ball peen 400 gm with handle. 4 nos. 4 nos.
Cold Chisel 20 x200 mm 4 nos. 4 nos.
Cross Chisel 10×150 mm 4 nos. 4 nos.
Half Round Chisel 10×150 mm 4 nos. 4 nos.
Diamond point Chisel 10×150 mm 4 nos. 4 nos.
File Half round 2nd cut 250 mm 4 nos. 4 nos.
File triangular smooth 200 mm 4 nos. 4 nos.
File round smooth 200 mm 4 nos. 4 nos.
File square smooth 200 mm 4 nos. 4 nos.
Round nose pliers 200 mm 4 nos. 4 nos.
Combination pliers 200 mm 4 nos. 4 nos.
Scraper A 250 mm (Bearing) 4 nos. 4 nos.
Scraper B 250 mm (Triangular) 4 nos. 4 nos.
Scraper D 250 mm (Half Round) 4 nos. 4 nos.
Spindle blade screw driver 100 mm 4 nos. 4 nos.
Allen keys 2 to 16 mm (Hexagonal) 4 nos. 4 nos.
Card file 4 nos. 4 nos.
     
Tap and die set M6, M8, M10, M12, M16, M20 & M25 with necessary tap 1 each 1 each
wrench and die holder.    
Spanner socket set of 25 pieces (10 to 25, 27, 30, 32, mm = 18 pcs and 1no. 1no.
assorted = 7 nos.)    
Hammer soft (faced 30 mm dia.) plastic tipped. As required As required
Pipe wrench 450 As required As required
Chain pipe wrench 650 As required As required
Telescopic gauges 13 mm to 300 mm. As required As required
Tap Extractor 1 no. 1 no.
Linear Actuator (Differential and non-differential) 1 each 1 each
Cut section  model of Pneumatic vales 1 no. 1 no.
Vibrometer As required As required
Flow Detector 1 no. 1 no.
Magnetic crack detector 1 no. 1 no.
Engineers Stethoscope As required As required
Stud Extractor 1 no. 1 no.
Tool picker collate type As required As required
Tool picker magnetic type As required As required
Magnifying Glass 75 mm 1 no. 1 no.
Pin spanner set 1set 1set
Hand keyway breacher As required As required
C.I. Surface plate 400 x 400 mm with stand and cover As required As required
Head lamp 1 no. 1 no.
Bearing and gear tester As required As required
Master test bars (Different sizes) 1 no. 1 no.
Spirit Level 150 mm,  accuracy 0.02 mm / 1000 mm 2 nos. 2 nos.
3 Cells Torch 2 nos, 2 nos,
Gasket Hollow punches 5, 6, 8, 10, 12, 19, 25 mm dia. 1 each 1 each
Bar type Torque Wrench 1 no 1 no
Cam lock type Screw Driver 1 no 1 no
Flaring tools 2 no 2 no
Tube Expander up to 62 mm 2 set 2 set
Circlip Pliers (inside, outside and straight) 1 each 1 each
Sledge hammer 5 Kgs. 1 no 1 no
Viscometer 1 no. 1 no.
Vernier height gauge 300 mm 1 no. 1 no.
Maintenance tool kit trolley of 1200 x 800 x1200 mm (L x W x H) As required As required
Steel lockers for 20 trainees 2 nos. 2 nos.
Steel cupboard 180 cm x 60 cm x 45 cm 6 nos. 6 nos.
Workbench 240 cm x 120 cm x 75 cm (Each bench fitted with 4 vices) 5 nos. 5 nos.
Bench Vice with 100 mm jaw 20 nos. 20 nos.
Letter punch 5 mm set 1 set 1 set
Number punch 5mm set 1 set 1 set
Deep cutting hacksaw frame 300 mm 1 no. 1 no.
Bearing puller 1 no 1 no
     
Vernier  Bevel protractor with 150 mm blade 1 no. 1 no.
Vernier caliper 200 mm with Inside and depth measurements 2 nos. 2 nos.
Dial vernier caliper 200 mm, with 0.02 mm least count 1 no. 1 no.
Optical Bevel protractor 1 no. 1 no.
Outside micrometer 0 to 25mm 1 no. 1 no.
Outside micrometer 25 to 50 mm 1 no. 1 no.
Outside micrometer 50 to 75 mm 1 no. 1 no.
Combination set with 300 mm blade centre head, square head and protector 1 no. 1 no.
head.    
Sine bar 200 mm 1 no. 1 no.
Slip Gauge Box (workshop grade) – 87 pieces per set 1 no. 1 no.
Inside micrometer 50 mm to 200mm, 0.01 mm least count with six 1 no. 1 no.
extension rod.    
Gear tooth Micrometer ( metric ) 1 no. 1 no.
Bevel gauge 200 1 no. 1 no.
Dial test indicator – Plunger type-Range 0-10 mm , Graduation 0.01 mm & 1 set 1 set
0.001mm Reading 0-10 with revolution counter ( complete with clamping    
devices and magnetic stand )    
Dial test indicator – Puppitast type-Range 0-10 mm , Graduation 0.01 mm 1 set 1 set
& 0.001 mm.  Reading 0-10 with revolution counter ( complete with    
clamping devices and magnetic stand )    
Feeler gauge 1 no. 1 no.
Radius gauge 1 to 25 mm radius 1 no. 1 no.
Screw pitch gauge for metric, standard & fine pitches. BSP & BSW pitches 1 no. 1 no.
( 0.25 to 6 mm )    
Center gauge 55º x 47½º 1 no. 1 no.
Center gauge 60º 1 no. 1 no.
Plug gauge Morse taper No.1, 2, 3, 4, 1 set 1 set
Ring gauge Morse taper No.1, 2, 3, 4, 1 set 1 set
Ring gauge Ø20mm (Go and No Go ) 1 no. 1 no.
Limit plug gauges Ø20mm 1 no. 1 no.
Wire gauges 1 no. 1 no.
Bore gauge with dial indicator (1 mm range, 0-0.01 mm graduation)-Range 1 no. 1 no.
of bore gauge 18-150 mm)    
Straight edge 485 mm to 1445 mm 1 set 1 set
Bearing fitting tool 1 set 1 set
Multimeter 2 Nos. 2 Nos.
Tong tester 1 No. 1 No.
Megger 1 No. 1 No.
Wire stripper cum cutter 1 No. 1 No.
Crimping Tool 1 No. 1 No.
     
Reduction sleeve and extension  socket. As required As required
Centre drills  3, 4 and 5 mm (Consumable) 2 nos. each 2 nos. each
Revolving centre with arbor As required As required
Knurling tool with holder (straight, cross, diamond ) 1 each 1 each
Dog carrier As required As required
Oil can pressure feed As required As required
Tool holder (straight) to suit  6 & 8 mm sq. bit size As required As required
H.S.S. tool bits 6 mm, 8 mm sq. x100 mm length (consumable) As required As required
     
Cylindrical milling cutter Ø 63 x 70 x Ø 27 mm 1 no. 1 no.
Side and face cutter Ø 80 x 10 X Ø 27 mm 1 no 1 no
Slitting Saw cutter  Ø 100 x 6 X Ø 27 mm 1 no. 1 no.
Slitting Saw cutter Ø 75 x 3 X Ø 27 mm 1 no. 1 no.
‘T’ slot cutter with parallel shank- Ø 17.5 x 8 mm width x dia. of shank  8 mm 1 no. 1 no.
Woodruff key seating cutters A 13.5×3, A16x4 1 each 1 each
Parallel shank end mill Ø 5 mm, Ø 6 mm, Ø 8mm, Ø 10 mm and Ø 12 mm 1 each 1 each
Disc type form milling cutter (involutes form -1.5 & 2 module, 20° pressure angle) As required As required
Scribing block universal 300mm As required As required
V-Block-Approx 65x65x80 mm with clamping capacity of 50 mm with clamps 1 set each 1 set each
D.E spanners 3-4 , 6-8, 10-12, 13-14, 15-16, 18-19, 20-22, 24-26 ( 8 spanners) 1 set 1 set
Angle plate-adjustable 250x250x300 mm    
Twist Drill Parallel Shank Ø 4 mm to Ø 12 mm in steps of 0.5 mm    
Grinding wheel dresser (diamond dresser) with holder 1.5 carat diamond    
C – clamp- 50 mm & 75 mm    
Hand reamer 6 to 16 mm in steps of 1 mm    
Machine reamer 6 to 16 in steps of 1 mm    
     
SS and SC centre lathe (all geared) with minimum specification as:

Centre height 150 mm and centre distance 1000 mm along with 3 & 4 jaw

chucks, auto feed system, safety guard, taper turning attachment, motorized

coolant system,  lighting arrangement & standard accessories.

 2Nos. 2Nos.
Universal Milling machine with minimum specification as:

Table Length x width 1200 x 300 mm having motorized up & down movement along

with auto feed arrangement and with following attachments such as:

a. Vertical head

b. Slotting attachment

c. Rack cutting attachment

d. Rotary table

e. Dividing head

f.   Adaptors, arbors and collects etc. for holding straight shank drills and cutters from 3 mm to 25 mm.

 1Nos. 1Nos.
Surface grinding machine wheel dia 180 mm (or near) reciprocating table,

longitudinal table traverse 200mm (or near) full motorized supplied with

magnetic chuck 250 X120mm and necessary accessories.

 1Nos. 1Nos.
Pillar Drill machine type 20mm capacity. 1Nos. 1Nos.
Double ended Pedestal Grinder with 178 mm wheels(one fine and one rough)-

motorized with twist drill grinding attachment

 1Nos. 1Nos.
Flexible Hand Grinder 100 mm dia – light duty 1Nos. 1Nos.
Portable Drilling machine 6 mm capacity. 1Nos. 1Nos.
Shaping Machine 450 mm stroke (motorized) with all attachments 1Nos. 1Nos.
Pipe bending machine 1Nos. 1Nos.
Hydraulic trainer with necessary elements for different machine circuit with all

types of transparent valves and pressure gauge, reservoir etc.

 1Nos. 1Nos.
Pneumatic trainer with necessary elements for demonstration different machine

circuit with all types of valves, pressure gauge and compressor etc.

 1Nos. 1Nos.
     
Old Centre lathe 1no 1no
Old Milling Machine (Universal) 1no 1no
Old Grinding Machine (Universal) 1no 1no
Old Shaping Machine 1no 1no
Old Gear Box (any type) 1no 1no
Revolving Centre 1no 1no
Old hydraulic power pack with hydraulic cylinder 1 no 1 no
Old hydraulic power press 1 no 1 no
Old Gear pump 1 no. 1 no.
Old Vane pump fixed and variable delivery 1each 1each
Old Piston pump ( Radial & Axial) 1each 1each
     
Foundation bolts (different types) 1each. 1each.
Plumb bob 1 no. 1 no.
Square Box Wrenches 1 no 1 no
Square T Wrenches 1 no 1 no
Engineers square 700 mm 1 no 1 no
Threaded Fastener B Type 1 no 1 no
Threaded Fastener C Type 1 no 1 no
Threaded Fastener F Type 1 no 1 no
Hoisting Equipment: chain pulley, steel slings, rope, belt, tackles 1 set 1 set
Privacy Policy | Terms of Use
© 2012-2024 All rights reserved by Govt. Technical Training Institute | Powered By INFOCREATIVES